1166 Stone Sealing and Glazing Adhesive

1166 stone sealing glue

1166 stone glaze sealing glue is specially made of epoxy resin, which is an environmentally friendly "no need to grind and polish, natural light is as bright as a mirror" high-hardness surface brightening and brightening natural stone glaze sealing glue,

1. Main characteristics:

Environmentally friendly and odorless, strong adhesion, high hardness, good brightness, automatic leveling, natural defoaming, anti-yellowing, no need for polishing Natural light is as bright as a mirror, and has special adhesion to natural stone.

2. Main uses:

Natural stone, artificial stone, ceramic tiles, handicrafts, furniture, plates and other surfaces are high-gloss sealing glaze.

3. Basic parameters:

Appearance:

Colorless and transparent

Proportions:

A3 vs. B1

Hardness:

87~89 / Shao D

Solid contains:

99～99.7 %

Viscosity: AB after mixing

2200～2500mPa.S/25 ℃

Temperature Resistance:

-20～ 90 ℃

4. Construction method:

1. The substrate needs to be sealed with dust, oil, moisture, clean and dry.

2. Stir the glue evenly according to the ratio of A3/B1 (weight ratio). It is appropriate to mix less than 1 kg of glue at a time, and use as much as you want.

3. The glue after mixing is applied to the surface of the product in time, so that the glue has enough time to level and defoam.

4. Gluing method: brush, scrape, spray, and spray.

5. Glue stirring: Stir clockwise, too fast is easy to produce bubbles, and the stirring time is 1-2 minutes.

6. Defoaming: The glue will naturally defoam, and can also be defoamed with a musket or vacuum.

7. The glued product is placed flat in a clean room for heating and baking, the temperature is about 35°C∽40°C, and baked for more than 8 hours.

5. Other matters:

1. The glue ratio should be precise and the stirring should be even.

2. The operation and drying must be dust-proof in a clean room, and it is strictly forbidden to touch the glue before it is cured.

3. It is not recommended to operate below 28 °C, and the surface effect of the product made by the test is not good.

4. If spraying glue is used, the diameter of the spray gun is more than 2.5.

5. If the ambient temperature is lower than 25°C, it is recommended to heat the A glue to about 35°C~40°C.

6. Wear protective glasses, protective masks, gloves and other protective facilities during construction to keep the site ventilated.

7. Clean equipment and tools with pure industrial alcohol or thinner.

8. If it touches the skin, scrub it with alcohol or thinner, and then rinse with clean water. If it splashes into the eyes with clean water and rinses, seek medical attention in serious cases.

6. Specifications and shelf life:

1. The shelf life is 6 months in a cool and sealed state.

2. Packing: 1.5kg/group, 20kg/group.