Oil-Based Adhesive

4800 Special Rubber and Plastic Adhesive

Brief description:4800 Special Rubber & Plastic Adhesive4800 Special Rubber & Plastic Adhesive is

Basic Information

Model

4800 Special Rubber and Plastic Adhesive

Brand

Jiao Lao Er

Time

2026-02-02

Click

Detailed Introduction
4800 Special Rubber & Plastic Adhesive

4800 Special Rubber & Plastic Adhesive is a single-component oil-based adhesive made from styrene-butadiene resin and polymer additives.

1. Characteristics:

Strong adhesion, low odor, aging resistance, soft adhesive film, fast bonding speed, and easy to operate.

2. Main bonding materials:

PE film, thick PVC film, PE board, rubber sheet, TPE foam sheet, EVA sheet, aluminum foil, melamine board, PVC foam board, iron sheet, aluminum sheet, leather, oil canvas, and other composite bonding. It can also be used for bonding composite of glass wool rolls, aluminum silicate needle-punched blankets, rock wool, and aluminum foil fabric films.

3. Basic parameters:

Appearance:
Translucent

Viscosity:
2500~3500 cps

Solid content:
40±5%

Shear strength:
5±2 MPa

Peel strength:
6±3 N/cm

Initial positioning:
10 minutes

Full bonding:
24 hours

Temperature resistance:
-15℃ to 70℃

4. Usage method:

1. Clean and dry the bonding surfaces, removing oil, dust, water, etc.
2. Shake the adhesive well before use to prevent sedimentation, and open the cap to use.
3. Generally, apply glue on both surfaces; apply a thin layer without overcoating.
4. Allow the glue to air for 2–3 minutes before bonding.
5. After bonding, it can be moved in 5 minutes, reaches 80% adhesion in 2 hours, and fully sets in 24 hours.

5. Precautions:

1. Avoid inhalation and ingestion, and keep away from children.
2. Wear protective clothing and gloves during use, and keep the work area ventilated.
3. For unused adhesive, seal the bottle with plastic wrap and tighten the cap to prevent thickening.
4. Do not move freshly bonded products casually to avoid affecting adhesion.
5. This product is flammable, so keep away from fire during use and storage.
6. If the glued surface is exposed for more than 20 minutes, the adhesion will be invalid.
7. When the ambient temperature is below 5℃, the adhesive needs to be warmed before use.

6. Packaging specifications:

3.2 kg/bucket, 15 kg/bucket

7. Storage/Shelf life:

Store in a cool, dry place and keep sealed. Shelf life is 12 months.

Hotline:+86-021-3378 1089

Sales: 180-1772-3931 Ms. Li

Sales: 189-1830-8552 Ms. Zhong

Tech: 137-6150-2878 Mr. Liu

Tech: 180-1772-5191 Mr. Tang

Copyright © 2026 Shanghai Nanbing Environmental Technology Co., Ltd.  Address:13651818911@163.com