1331 Stone Slab Joint Repair Adhesive

1331 Slab Tile Grout Repair Adhesive

1331 Slab Tile Grout Repair Adhesive is an eco-friendly grout bonding adhesive made from epoxy resin and special additives.

Features:

Good grout effect, strong adhesion, high hardness, good toughness, aging resistance, water and oil resistance, high and low temperature resistance, can be polished, environmentally friendly and odorless.

Main Uses:

Grout repair and bonding for slab tiles, ceramic tiles, marble, cement walls, ceramics, artificial stone, metal, wood, etc.

Basic Parameters:

Color:

Black, White, Gray

Ratio:

A1:B1

Working Time:

20–25 minutes (25°C)

Surface Dry Time:

100–120 minutes (25°C)

Hardness:

86–89 (Shore D)

Viscosity:

50,000–60,000 (25°C)

Temperature Resistance:

-30~+100°C

Application Method:

1. Clean and dry the area to be filled, removing oil, dirt, moisture, etc.

2. Mix the adhesive evenly at a 1:1 ratio (prepare only the amount needed).

3. Use a spatula to apply the adhesive to the gap or joint, pressing it tightly, and clean off any excess adhesive in time.

4. Completely cure at room temperature for 8 hours, then polish as needed.

5. Tools and equipment can be cleaned with thinner, rosin solvent, paint solvent, industrial alcohol, etc.

Important Tips:

1. Adhesive should not contact skin as it may cause an allergic reaction.

2. Seal and store in a cool place after use.

3. Black, white, and gray colors can be mixed as desired.

4. The above data is for reference only; actual operation prevails.

5. If adhesive gets on the skin, wipe it off with a cloth, then wash with soap and warm water, or use alcohol.

Shelf Life:

Seal and store in a cool place for 1 year.

Specifications:

400g/set, 2kg/set